With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - chris king! with our valves for life guarantee and their stunning colourways your bike is in for a real treat for years to come!
MK2, WHAT'S NEW?
Still made Made from lightweight anodised 7075 aluminium as standard, our new mk2 tubeless valves are now compatible with all rim inserts and come with a spoke key cap as well as a valve core removal cap.
That's Right ... The best just got even better!
INSERT COMPATIBLE BASE
THE ADDITION OF A UNIQUE FOUR-WAY X-CUT BASE TO ENABLES OUR VALVES TO NOW WORK WITH ALL TYRE INSERTS.
THE CHANNELS CUT INTO THE BASE OF THE VALVE ALLOW AIR AND SEALANT TO PASS THROUGH WHEN INSERTS ARE PUSHED UP AGAINST THEM.
UNLIKE MOST OTHER INSERT-COMPATIBLE VALVES, OUR VALVES HAVE A ‘STRAIGHT-THROUGH’ DESIGN SO THERE’S NO REDUCTION OF SEALANT OR AIR FLOW WHEN TYRE INSERTS ARE NOT USED.
ALL OF THIS WITH NO ADDED WEIGHT!
Spoke key cap
Our MK2 valves now come with a WORLD-FIRST SPOKE KEY Presta valve CAP!
THE spoke KEY IS SIZED FOR STANDARD 3.4MM SPOKE NIPPLES AND IS THE PERFECT TOOL FOR TIGHTENING LOOSE SPOKES IN TRAILSIDE EMERGENCIES.
To use, simply unscrew the cap, slot your spoke through the gap in the top of the cap and slide down the spoke until the cap fits over your spoke nipple.
Valve Core Remover cap
WHETHER YOU'RE IN THE WORKSHOP OR OUT ON THE TRAIL, OUR VALVE CORE REMOVER CAPS HELP TO QUICKLY REMOVE THE VALVE CORE To DEFLATE THE TYRE OR TOP UP WITH SEALANT.
TO de-core the valve, all you need to do is:
- Unscrew the valve cap
- Slot the valve cap over the valve core
- Twist anticlockwise until the core can be pulled out
- Repeat in reverse to refit
FITTING INSTRUCTIONS:
- Remove valve cap, o-ring and lock nut
- Insert valve through valve hole in rim
- Push the o-ring onto valve stem
- Thread the lock nut onto valve stem
- Hand tighten lock nut until firm
- Screw on valve cap
